The INNODA 13.3-inch Aluminum Bezel Industrial Panel PC bridges the gap between compact operator touchscreens and expansive control room monitors. Purpose-built for CNC machinery consoles, automated packaging lines, smart medical carts, and logistics sorting stations, this hybrid terminal unites an extruded aluminum front frame with a heavy-duty steel rear enclosure to provide long-term 24/7 industrial dependability.
Featuring a 13.3″ widescreen 16:9 display format, operators benefit from high pixel density and wide viewing angles required to monitor complex PLC ladder logic, P&ID fluid diagrams, and real-time process gauges. Designed with a recessed downward-facing I/O cavity, communication lines and power wiring route cleanly without bending stress, enabling clean flush installation onto electrical cabinet doors or VESA articulated swing arms.
Key Architectural & Engineering Highlights
-
Hybrid Metallurgy Construction: The front face is engineered from high-rigidity extruded aluminum with silver contrast accents for a modern aesthetic, while the rear enclosure is stamped from industrial steel with corrosion-resistant powder coating for superior EMI shielding and thermal rigidity.
-
Protected Recessed I/O Architecture: All operational interfaces—including industrial terminal power, DB9 serial, dual display outputs, and high-speed USB 3.0—are set deep inside a sunken bottom cavity. Cables remain sheltered from physical impacts and downward-dripping fluid splashes.
-
Dual DC Power Redundancy: Equipped with an industrial 3-pin Phoenix screw-clamp terminal supporting a wide 9V–36V DC input for factory-floor bus rails, alongside a secondary DC 12V locking jack for test-bench diagnostics.
-
Passive Convective Cooling & Fast Maintenance: Engineered with passive convective rear heatsink grilles that eliminate moving fan bearings. A dedicated rear maintenance hatch allows quick-access replacement of M.2 SSD storage without opening the primary chassis.
-
True-Flat IP65 Front Bezel: The seamless glass-to-edge front face prevents liquid, coolant mist, and dust accumulation, supporting rapid wipe-down sanitation in pharmaceutical suites and light washdown environments.
-
Audio Feedback Integration: Dual integrated acoustic speaker ports on the rear chassis provide audible alarm enunciations, buzzer alerts, and operator touch confirmation tones.
Technical Specifications Matrix
| System Category | Detailed Technical Specification |
| Display Diagonal & Aspect Ratio | 13.3-inch Active Matrix TFT LCD, 16:9 Widescreen |
| Native Resolution & Viewing Angles | Full HD 1920 × 1080 / 1366 × 768; 85°/85°/85°/85° Wide Symmetrical Viewing |
| Luminance / Brightness | Standard 300 to 400 nits ($cd/m^2$) / Optional High-Brightness Sunlight Readable up to 1000 nits |
| Touchscreen Technology | 10-Point Projected Capacitive (PCAP) Multi-Touch with 7H Chemically Toughened Glass |
| Processor (CPU) Options | Intel Celeron Quad-Core (J6412 / J1900) or Core i3 / i5 / i7 Ultra-Low TDP Processors |
| System Memory (RAM) | 1 × DDR4 / DDR3L SO-DIMM Slot, supporting up to 16GB / 32GB High-Speed RAM |
| Storage Architecture | 1 × M.2 2280 NVMe/SATA SSD slot (Quick-access rear service cover) + Optional 2.5″ SATA SSD |
| Operating System Support | Windows 11 / Windows 10 IoT Enterprise, Linux (Ubuntu, Debian, CentOS) |
| Serial Interfaces (COM) | 1 × DB9 COM Port (RS232 protocol standard, optional RS485/RS422 configuration) |
| USB Ports | 4 × USB Type-A (2 × High-Speed USB 3.0 + 2 × USB 2.0) |
| Network & Audio | 1 × Gigabit RJ45 LAN (Realtek/Intel) + 1 × 3.5mm Audio Output / Mic Jack + Dual Integrated Speakers |
| Display Expansion | 1 × VGA Video Output (Supports dual independent SCADA visualization) |
| Power Input Architecture | Dual Power: 3-pin Phoenix Terminal (DC 9V–36V Wide Input) + DC 12V Barrel Jack; Physical ON/OFF Switch |
| Enclosure Construction | Extruded Aluminum Front Bezel (Silver Border Accent) + Heavy Powder-Coated Steel Rear Chassis |
| Ingress Protection | IP65 Front Face Washdown & Dustproof Sealed; IP20 Rugged Rear Steel Body |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) / Optional Wide Range -20°C to 70°C |
| Mounting Provisions | Embedded Panel-Mount (Clamping brackets included) & Rear VESA 75×75 / 100×100 mm |
Target Industrial & Commercial Sectors
-
CNC Machine Tool Consoles: The 13.3″ 16:9 form factor fits onto articulated control arms, displaying complex G-code toolpaths with zero screen crowding.
-
Automated Packaging & Bottling Machinery: Front IP65 sealing withstands daily washdown spray while recessed cabling eliminates wire snags from moving conveyors.
-
Smart Medical & Laboratory Carts: Compact footprint and silent fanless cooling make it ideal for mobile diagnostic workstations and cleanroom data terminals.
-
Self-Service Kiosks & Vending Systems: Flush panel mounting with dual 9V–36V power simplifies integration into automated retail lockers and ticket dispensers.
Need custom I/O cable harnesses, specific wide-temperature motherboard builds, or 3D STEP models for cabinet design? Contact INNODA’s technical engineering team to request wholesale pricing and evaluation sample units.
